Products for electrical installation tips, sleeves, etc.

Power tips and sleeves
Power tips and sleeves are used for terminating wires and cables with copper and aluminum cores by crimping for subsequent bolting of the conductor to the equipment or bus. To end the conductors, it is necessary to use a special crimping tool.

Tips and sleeves are bolted
Designed for crimping aluminum cables and wires without axial load. The sleeves have an end-to-end design. Operating voltage: up to 10 kV

The tips are insulated and non-insulated
Cable lugs (crimping cable lugs, cable lugs for electrical installations) are special electrical accessories used to simplify the process of connecting (docking) and mounting cables with both aluminum and copper cores.

Insulated connectors
The main function is to create the necessary universal connector at the ends of the electrical wires, which improves the quality of the contact at the junction, and also preserves the integrity of the wire itself when it is connected with screw terminals, which indicates the reliability of the connection in the future. Designed for the installation of quick-release connections of multi-wire flexible copper wires by crimping.

Insulated connecting sleeves
The sleeves of GSI PROxima consist of a seamless one-piece copper tube, on top there is an insulating shell made of polyvinyl chloride (PVC), which serves as a reliable protection of the sleeve from environmental influences and mechanical damage. A locking die-cut located in the center of the sleeve determines the depth of entry of the wire into the connector. Designed for butt-to-butt connection of copper wires by crimping. The installation method is crimping on top of the insulating housing, while the electrical contact is sealed.

QMS terminals
QMS terminals with PROxima paste are designed for connecting and branching single-core conductors made of copper and aluminum or stranded copper wire with a tip in AC electrical circuits with a frequency of 50 Hz and a voltage of up to 400 V. The terminals are used in junction boxes.The convenience of these terminals lies in the screwless fastening of the conductors (a spring-loaded steel plate with an anti-corrosion coating is used).

Terminal blocks (terminal clamp 12 sections)
The terminal blocks (terminal clamp, 12 sections) of PROxima are made of white polyethylene and polystyrene, which does not spread gorenje.They are used in electrical circuits with a rated voltage of up to 400V and a frequency of 50 Hz. They are designed for screw connection of conductors, exclude the possibility of a short circuit to the housing of an electrical installation.The block can be easily cut into blocks with the required number of terminal pairs. They are used in AC electrical circuits with a rated voltage of up to 400 V and a frequency of 50 Hz. Available in white, black, blue and yellow colors.

Connecting insulating clamps (PPE)
The connecting insulating clamps of the PPE are designed to connect wires and cables into a single bundle, insulation of copper and aluminum wires. The clamp is wound on the exposed parts of the wires in several turns until the bundle of wires is completely fixed, while the outer housing performs the function of insulation. The housing of the insulating clamp is made of pressed refractory PVC; an anodized spring of conical configuration is mounted inside the plastic housing. PPE clamps are used in electrical work, both in domestic and industrial premises. The convenience of these products lies in the speed of installation, reliability of connection and insulation of wires, as well as the possibility of repeated use of the node without violating the integrity of the wires.

Puncturing couplers
PROxima piercing couplers allow you to perform a high-quality electrical connection in a minimum time without the use of soldering and other labor-intensive processes. There is no need to clean the wire and isolate the connection, the couplers combine all the advantages of fast electrical installation and do not require special skills and tools (you will only need pliers to install the couplers). They are designed for the removal (branching) of conductors from a live wire, as well as for the detachable connection of two or more conductors using a device for piercing insulation in AC and DC electrical circuits.

Duct tape
The duct tape is made of high-quality non-flammable PVC. It is an expendable material for household and construction electrical work. Rubberized insulating tape based on cotton fiber is designed for work in non-aggressive environments. 1 FLOOR – for industrial use, one-sided of ordinary stickiness (according to GOST2162-97). It is used for electrical insulation, for marking purposes, as well as for protection against mechanical damage, moisture, etc. It is resistant to UV rays, humidity, abrasion, metal corrosion, and aging. A rubber-based adhesive layer.

The heat shrinkable tube is HERE
The polyethylene heat shrinkable tube can be used HERE as an electrical insulation, marking and decorative material. It is intended for sealing couplings, sealing cable ends with caps, cable insulation, insulation of cores, wire junctions, bundling of wiring harnesses, for mechanical protection of products, for protection from dirt, for color marking of products, etc. The main property of a heat shrinkable tube is the ability to shrink (shrink) under the influence of high temperature (from 90 to 125 ° C). The shrinkage process occurs very quickly, the tube HERE completely repeats the contours of the object. You can use a heat gun (hair dryer), which makes the heat shrinkable tube easy to use in everyday life, for example, as an alternative to insulating tape.

Clamps
The clamps are designed for linking cables and wires into a bundle and mounting cable lines and conductors. They are made of polyamide 6.6, which has good resistance to oils, lubricants, oil derivatives, chloride solvents, resistance to weak acids and UV rays. Sets of clamps in cans are cable ties of the most common sizes and different colors assembled in one plastic package. Thanks to the transparent plastic packaging, such kits are easy to transport and it is easy to identify what color and size of the clamp is in the package.

Plastic mounting brackets
Designed for fast and reliable fastening of round and flat cables. Flexible, non-flammable, impact-resistant polypropylene.

• Изделия для электромонтажа. Технические характеристики.