Buttons, switches, light signals XB4, S-pro67, etc.

Lighting fittings
The control equipment is intended for operational control of technological equipment and indication of the state of electrical circuits. The equipment is used in alternating current electric circuits with a frequency of 50/60 Hz with a voltage of up to 660 V and a constant voltage of up to 400 V; it is installed, for example, in push-button posts, input and distribution devices, automatic reserve switching devices, control stations for electric drives, etc.

Buttons
The control equipment is intended for operational control of technological equipment and indication of the state of electrical circuits. The equipment is used in AC electrical circuits with a frequency of 50/60 Hz with a voltage of up to 660 V and a constant voltage of up to 400 V.

The "Fungus" buttons
Mushroom type buttons are used in AC electrical circuits with a frequency of 50/60 Hz with a voltage of up to 660 V and a constant voltage of up to 400 V. This type of design (the active part protrudes) allows you to quickly send a control signal to the equipment by simply pressing. Turning on the button is facilitated by the large pressing surface area.

Switches
A switching device that is designed to switch AC electrical circuits with a frequency of 50/60 Hz with a voltage of up to 660 V and a constant voltage of up to 400V. Available in types: with long handle, with short handle, with backlight, without backlight, with lock.

XB4 Assembly Series
Prefabricated buttons and switches of the 22mm XB4 series are designed for operational control of technological equipment. A button, lens or switch assembly with mounting fittings and additional contacts are used in AC electrical circuits with a frequency of 50/60 Hz with a voltage of up to 660V and a constant voltage of up to 400V; it is installed, for example, in push-button posts, input and distribution devices, automatic reserve switching devices, electric drive control stations, etc. Now the design does not depend depending on the voltage and type of contacts, you can assemble absolutely any necessary button.

Additional devices for buttons and switches
Additionally, the equipment is used in conjunction with lighting fittings, control buttons and switches and allows you to increase the number of contact groups through additional contacts, adds the possibility of marking. Silicone pads allow you to increase the degree of protection of the buttons.

Push button posts
PROxima plastic push-button posts are made of high-quality plastic that does not support gorenje. They are available with a number of seats from 1 to 6.

Remote controls
The IP54 PROxima push-button control panels are a switching device with return buttons and a sealed housing made of heat-resistant ABS plastic. A protective oil seal is provided to seal the cable entry, and a sealing gasket is installed between the housing and the panel.

Push-button switches with locking
Push-button switches with IP40 PROxima lock are a switching device with two lockable buttons and a metal body. A protective oil seal is provided to seal the cable entry.

Cam switches
The PROxima PC cam switches are mechanical switching devices. Designed for use in AC circuits with a rated voltage of up to 400 V and a frequency of 50/60 Hz. Due to the increased silver content in the contacts, their reduced transient resistance and increased resistance to environmental influences are achieved.

Limit and way switches
Limit (track) switches are designed for use in electrical control circuits, signaling and monitoring the relative position of moving parts of the mechanism in space. The nomenclature is shown in Table 1. Limit switches of the TZ-8 series comply with GOST IEC 60947-5-1-2014.

Packet switches and switches
Batch switches, switches are designed to operate in electrical circuits with voltages up to 400 V AC with a frequency of 50, 60 Hz and 400 Hz and up to 220V DC Switches (switches) provide operation in the following modes: continuous, intermittent and repeated short-term. The switching frequency is no more than 120 times per hour.

Potentiometers
Potentiometers are adjustable voltage dividers that are designed to regulate voltage at a constant current value, and are made according to the type of alternating resistor.

S-pro67 signal light fittings
The S-Pro67 series display and control equipment is made of AISI 304 stainless steel. It is designed for operational control of technological equipment and indication of the state of electrical circuits. It is used in AC networks with a frequency of 50/60 Hz with a voltage of up to 660 V and a constant voltage of up to 400 V. It is installed in a 19 mm mounting hole and has an IP67 degree of protection.

• Кнопки, кнопочные посты, переключатели, светосигнальная арматура. Технические характеристики.