Safety devices BP32U MAXima et al.

Modular load switches AVN up to 125A AVERES
AVN AVERES load switches are mechanical switching devices and are used for operational switching on and off in AC electrical circuits. The switches are designed for switching active and inductive loads, including motors already protected by other switching devices. Load switches comply with GOST R 50030.3-2012 (IEC 60947-3:2008)

Load switches VN-45 to 5000A PROxima
Circuit breakers of the VN-45 PROxima series are air switches with a mechanism for free disengagement and operation of contacts by means of a mechanism with a spring energy storage. Structurally, the switch is made in the form of a mechanical structure mounted on a rigid frame. The main controls and displays are displayed on the front panel.

Load switches VN-99 to 800A PROxima
The VN-99 switch is made in the form of a monoblock and consists of a base and a cover with a false panel, which has a window for the control handle. The base is made of heat-resistant plastic, which does not support combustion and is a supporting structure for connecting clamps, fixed and movable contacts with an arc extinguishing system, and a control mechanism. Gorenje The lid covers all movable elements of the control mechanism and internal live parts.

Modular load switches VN-63, VN-125 to 125A PROxima
Load switches VN-63 and VN-125 PROxima are designed for operational control of sections of electrical circuits. The switches are produced in one-, two-, three- and four-pole versions. The load switches VN-63 (125) PROxima are made in a new, unique housing design made of non-combustion plastic and are interchangeable with VN-63 (100). Gorenje

Disconnector switches (switches) BP32U MAXima up to 630A
The BP32U (universal) disconnector switches of the MAXima series are designed for manual switching on and off of AC circuits with a rated voltage of up to 690 V with a frequency of 50 Hz. The design uses a three-pole knife-type contact system with a double visible chain break. With the help of double circuit break, large contact solutions and arc extinguishing chambers, effective extinguishing of the electric arc is ensured during load switching, which prevents premature and excessive wear of the contacts.

Disconnector switches (switches) VRE, UVRE up to 630A PROxima
The VRE PROxima disconnector switches are designed for manual switching on and off of AC circuits with rated voltage up to 500 V / 690 V (VRE/VRE with fuses) with a frequency of 50 Hz, as well as for protection against short circuits and overloads in models with fuses (fuses are not included in the package). A double visible circuit break and a robust housing with the function of an arc extinguishing chamber, made of non-flammable polyamide with fiberglass, ensure maximum switching safety.

UVRE vertical disconnector switches (switches) up to 630A PROxima
UVRE vertical disconnector switches PROxima folding type with fuses are designed for manual on/off and for protection against short circuits and overload of AC circuits with rated voltage up to 690 V with a frequency of 50 Hz (fuses are not included in the package). They are used in input and distribution devices, distribution and control cabinets, etc.

Modular switches MS up to 63A PROxima
MS PROxima modular switches are designed for manual switching on and off of low-voltage AC circuits of 400 V and a frequency of 50 Hz. They are intended for use in introductory distribution devices of residential and public buildings, in control points of individual loads. They can be used to turn on and off circuits under load.

Disconnectors RE19 to 3150A PROxima
Disconnectors of the PE19 PROxima series are designed for passing rated currents, switching on and off without load of electrical circuits with a rated voltage of up to 1000 V AC with a frequency of 50 and 60 Hz in electric energy distribution devices. Disconnectors have the following versions according to the type of manual drive: -a central handle located directly on the disconnector in its center; -a side handle mounted on the end of the drive shaft on the right or left; -a front offset handle designed to control the disconnector located in the NCU and mounted on the front surface of the NCU on the right or left

RP disconnectors (RPS, RPB) up to 630A PROxima
Disconnectors of the PROxima RP series are designed for passing rated currents, switching on and off without load of electrical circuits with a rated voltage of up to 500 V AC with a frequency of 50 Hz in electric energy distribution devices.

Disconnector switches (switches) TwinBlock up to 1600A PROxima
The disconnector switches of the TwinBlock PROxima series are designed for passing rated currents, switching on and off electrical circuits with a rated voltage of up to 690 V AC with a frequency of 50 and 60 Hz in electrical energy distribution devices.

Fusible fuses PPN up to 1250A PROxima
PROxima fusible fuses are designed to protect cable lines and industrial electrical installations from overload and short-circuit currents. Fuses are used in alternating current electric networks with a frequency of 50 Hz with a voltage of up to 660 V and are installed in low-voltage complete devices, for example, in switchboards SCHO-70, input and distribution devices VRU1, power distribution cabinets SRS1, etc.

Fusible inserts cylindrical PVC up to 80A PROxima
Fuse box: A part of a fuse containing a fuse element(s) intended to be replaced after the fuse has been triggered. If the overload currents or short-circuit currents exceed the permissible values, the fuse box will burn out and the indicator light will light up.

Fuse disconnectors for PVTs up to 80A PROxima
The fuse-disconnector is designed to install fused inserts of the PVTS type (or similar in design) and protect electrical circuits from short circuits and overloads. Fuse box: A part of a fuse containing a fuse element(s) intended to be replaced after the fuse has been triggered. If the overload currents or short-circuit currents exceed the permissible values, the fuse box will burn out and the indicator light will light up. Fuse disconnectors are used to protect cable lines, household and industrial equipment

VN-29 modular load switches up to 63A Basic
Load switches VN-29 Basic are designed for operational control of sections of electrical circuits. The switches are produced in one-, two-, three- and four-pole versions.

Three-position switches up to 63A Basic
Basic three-position switches are mechanical switching devices. Aluminum and copper wire switching is possible.

PC disconnectors up to 400A
Disconnectors of the PROxima PC series are designed for passing rated currents, switching on and off without load of electrical circuits with a rated voltage of up to 500 V AC with a frequency of 50 HZ in electric energy distribution devices.

• Предохранительные устройства. Технические характеристики.