Electrical equipment management VECTOR EKF PROxima, etc.

PROxima Frequency Converters
General industrial frequency converters VECTOR PROxima. Ensure accurate maintenance of the engine rotation speed depending on external factors. They provide a reduction in electricity consumption by 30 percent or more. They are available at rated capacities from 0.4 to 400 kW.

Basic Frequency Converters
The VECTOR-75 compact Basic compact frequency converter is designed to control the rotation speed of electric motors used in a wide range of industrial equipment. The converter ensures accurate speed maintenance as well as reduced energy costs. They are available at rated capacities from 0.4 kW to 2.2 kW.

Automatic reserve input (AVR) up to 630A PROxima
The AVR device is designed to provide backup power supply to a load connected to an electrical supply system with main and backup inputs. The AVR device automatically connects the backup power line in case of a voltage loss on the main line.

Programmable PROxima relays
Programmable PRO-Relay PROxima relays make it possible to significantly simplify the control circuits of electrical equipment, which increases their reliability and makes installation easier. Programming is carried out using the ILR-ULINK programming cable.

PROxima relay automation
A complete set of devices for monitoring and controlling electrical equipment and electrical circuits. Relays monitor network parameters, protect equipment from high and low voltage, limit power consumption, ensure uninterrupted power supply to consumers, allow you to set the operating time of devices and perform other functions.

Power supply units
The power supply is a pulse type voltage converter and converts the input AC voltage of 100-240 V into a constant stabilized voltage of 24 or 12 volts. The power supply is small in size and contains overload and short circuit protection.

Capacitors for reactive power compensation devices up to 50 kvar
PROxima cosine capacitors are used for static and automatic compensation of the reactive power coefficient in AC networks. Low-voltage three-phase cosine capacitors KPS are three capacitors connected in a triangle. The capacitors are manufactured on the basis of a metallized self-healing polypropylene film with a low loss coefficient, providing high performance characteristics.

Regulators for reactive power compensation devices
CRM controllers measure the power factor of the network and control the inclusion of cosine capacitors to maintain the optimal power factor. In this case, the capacitors are connected in such a way that the capacitors with the shortest operating time are connected once again, thus increasing the service life of the entire reactive power compensation unit

Stabilizers
The relay type AC voltage stabilizer is designed for stable supply of household and industrial loads of 230 V, 50 Hz with mains voltage deviations over a wide range in value and duration with a single-phase sinusoidal voltage that meets the requirements of GOST 32144-2013 with filtering of network interference and without distortion in its shape. When the voltage is increased or decreased, the device equalizes it, so that the equipment can be continuously operated without harming it.

EMC filters
EMC filters are available for currents from 5 to 200A and are used with frequency converters with a power of up to 75 kW.

ePRO 24
The ePRO 24 controller continuously monitors the presence of voltage on 6 built-in inputs (I1-I6), and also polls the available expansion modules via the RS-485 interface. Next, the controller transmits data to the server via the MQTT protocol using Wi-Fi or GSM communication channels. The server, in turn, transmits the data to the user's application. As a result, the user, using the application, can remotely, in real time, observe which inputs have voltage and which do not, thereby monitoring the connected loads.

• Автоматизация и управление. Технические характеристики.